Rockwell Automation 8520 9/Series CNC Integration Maintenance Manual Documentation Set - Manual (Page 568)

I/O Interface
Section 10A
10A-45
Table 10A.AG lists the output specifications for the analog I/O.
Table 10A.AG
E- Series Analog I/O Output Specifications
Item Specifications Remark
Number of Output Points 1
Operating Voltage Bipolar: -10 to +10 V dc
Unipolar: 0 to +10V dc
Range selected by switch
next to the node address
switch on the analog I/O
Resolution 12 bit binary
Load Drive Capability Maximum 10 mA No Sustained Oscillation
Maximum 1 m F
Maximum m F
Response Rate Less than 200 m sec
Connection Terminal Block
PAL Variable Values Bipolar:
0 -- 2047 (0 to +10V dc)
2048 -- 4096 (--10 to 0 V dc)
Unipolar:
0 -- 4096 (0 to +10V dc)
The PAL variable name is
determined in your I/O
configuration using ODS.
Figure 10A.36 shows a typical analog I/O output device connection.