Rockwell Automation 8520 9/Series CNC Integration Maintenance Manual Documentation Set - Manual (Page 367)

Section 7A
Connecting Components
7A-19
Table 7A.A
Cable and Connector List (continued)
Cable No. Control From Module and Connector Cable Name To Module and Connector Cat. No.
C03 9/440 (all) On/Off Power Control Module Power Supply Cable Operator Panel Power Supply
on Operator Panel or on
Removable Operator Panel
Interface Assembly
Prepared by Customer
High
Low
C03
To local cabinet
ground bus
Power Supply
L1
ac
IN
L2
PE
L1
L2
COMMON
AUX
ac
BT02
Monochrome or color
Operator Panel
On/Off Power Control Module
ON SW
OFF SW
Power Supply
Connector On End of Cable Cable Type Connector On End of Cable Max. Cable Length
Miscellaneous Belden 9409 Miscellaneous Line Drop Limitation
Cable No. Control From Module and Connector Cable Name To Module and Connector Cat. No.
C04 9/260 and
9/290
Main Power Supply BT04 dc Output Cable Motherboard J1 Included with Main
Power Supply
9/230 Processor Board P12
1
2
3
4
5
6 1
2
3
4
5
6 pwr fail (white)
5.15 vdc main
gnd/gnd sense (black)
gnd (black)
--15 vdc (yellow)
5.15 v main/5 v sense
5.15 vdc main (red) 7 7
8 8
9 9
gnd (black)
+15 vdc (brown)
1 1 5.35 vdc pigtail to servo card (blue)
pwr fail (white)
5.15 vdc main
gnd/gnd sense (black)
gnd (black)
--15 vdc (yellow)
5.15 v main/5 v sense
5.15 vdc main (red)
gnd (black)
+15 vdc (brown)
5.35 vdc pigtail to servo card (blue)