Rockwell Automation 8520 9/Series CNC Integration Maintenance Manual Documentation Set - Manual (Page 485)

1 8
9 15
Section 9A
Operator Interface
9A-18
Interface Assembly Video Connection CN19M
Table 9A.G shows the interface assembly video signal connector.
Table 9A.G
Interface Assembly Video Signal Connection
Connector On To Connector On Cable
Motherboard/System
Processor
Removable Front Panel
Interface Assembly
Number
(page 7A-24)
Remark
J8
15 pin D--shell
CN19M
15 pin D--shell
C09 Video
Signal
Video connector CN19M is the connector that connects the removable
operator panel interface module to the motherboard (9/260 and 9/290) or
processor board (9/230).
Figure 9A.12 shows the pin assignments of the video connector CN19M.
Figure 9A.12
Video Connector CN19M 15 Pin Male D-shell Connector and Pin
Assignment
Pin No. Signal Name Pin No. Signal Name
1 GND (SHIELD) 9 NC
2 NC 10 GREEN (L)
3 GREEN (H) 11 NC
4 NC 12 NC
5 NC 13 NC
6 NC 14 H-SYNC (L)
7 H-SYNC (H) 15 V-SYNC (L)
8 V-SYNC (H)