Rockwell Automation 8520 9/Series CNC Integration Maintenance Manual Documentation Set - Manual (Page 31)

Section 1B
System Overview
1B-5
Table 1B.A lists the component options used to configure the control.
Table 1B.A
Component Options
Classification Module Name Quantity Notes
Basic Modules Processor 1 9/230 only
CPU Module and
Motherboard
1 9/260 and 9/290 only
Main Power Supply 1
Digital Servo maximum 3 servo modules per system; not used on the 9/230 and
9/440
Analog Servo (any combination of analog and/or digital servo modules) not used on the 9/230 and
9/440
I/O Ring Input/
Output
Modules
Digital I/O Refer to page 10A-1 20 inputs, 12 outputs
High Density I/O 66 inputs, 36 outputs
MTB Panel I/O 44 inputs, 18 outputs
Analog I/O 1 input, 1 output
Hand Pulse Generator Max. 3
1746 I/O Ring Adapter A-B 8500-1746I module
1771 I/O Ring Adapter A-B 8500-XIOC module
I/O Ring
Operator/MTB
Monochrome Operator Panel Refer to page 9A-1
Operator/MTB
Panels Color Operator Panel
Portable Operator Panel Requires Portable Operator
Panel Interface Assembly
Rotary or Push-Button MTB Panel 44 inputs, 18 outputs
Monochrome Pendant Option
Color Pendant Option
Expansion
Modules
Optional Feedback 3 max. 9/260 and 9/290 Digital only
Data Highway Communication Refer to 9/Series Data Highway Plus Communication
Module User Manual, publication 8520-5.1.6.
Not used on the 9/230
MMS/Ethernet Communication Refer to 9/Series MMS/Ethernet Communication Module
User Manual, publication 8520-5.1.5.
Not used on the 9/230