Rockwell Automation 8520 9/Series CNC Integration Maintenance Manual Documentation Set - Manual (Page 139)

8
1
15
9
11257-I
Port B
8
1
16
9
Section 4A
Primary 9/260 and 9/290 Components
4A-5
Figure 4A.4
Port B-J7 (has pin sockets) and Pin Assignments
Pin Assignment Pin Assignment
1 Chassis GND 9 Send Data B
2 Send Data A 10 Receive Data B
3 Receive Data A 11 Request to Send B
4 Request to Send A 12 Clear to Send B
5 Clear to Send A 13 Data Set RDY B
6 Data Set RDY A 14 Data Term RDY B
7 Signal GND 15 Not Used
8 Data Term RDY a
Fast I/O Connector (P3)
The fast I/O connector provides an interface port for fast input and output
to and from the control. Use the Fast I/O feature for direct inputs and
outputs to PAL, affecting features such as block skip and probing. Use
cable C11 to interface this connector with external I/O devices. For
information on using a termination panel to wire your fast I/O, refer to
page 10A-63, I/O Interface. Refer to the Cable List section on page 7A-26
for additional information on cable C11. Figure 4A.5 shows this connector
and lists the pin assignments.
Figure 4A.5
Fast I/O Connector-P3 (has pins) and Pin Assignments
Pin No. Signal Name Pin No. Signal Name
1 FAST_I1 9 FAST_O1
2 COM 10 COM
3 FAST_I2 11 FAST_O2
4 COM 12 COM
5 FAST_I3 13 FAST_O3
6 COM 14 COM
7 FAST_I4 15 FAST_O4
8 COM 16 COM