Rockwell Automation 8520 9/Series CNC Integration Maintenance Manual Documentation Set - Manual (Page 873)

Section
17
17-1
Installing 9/Series Hardware for CE Compliance
If your system is installed within the European Union, EEA regions, or has
the CE mark, the following regulations apply:
EMC Directive
This device is tested to meet Council Directive 89/336 Electromagnetic
Compatibility (EMC) using a technical construction file and the following
standards, in whole or in part:
EN 50081--2 EMC -- Generic Emission Standard, Part 2 -- Industrial
Environment
EN 50082--2 EMC -- Generic Immunity Standard, Part 2 -- Industrial
Environment
The products described in this manual are intended for industrial use in an
industrial environment. Use this table as a guide to determine what you
need to know about your CE compliant Allen-Bradley product.
Low- voltage Directive
This device is tested to meet Council Directive 73/23/EEC Low--voltage,
by applying the safety requirements of EN 61131--2 Programmable
Controllers, Part 2 -- Equipment Requirements of Tests.
For specific information required by EN--61131--2, refer to the following
Allen--Bradley publications:
Industrial Automation Wiring and Grounding Guidelines for Noise
Immunity, publication 1770--4.1
Guidelines for Handling Lithium Batteries, publication AG--5.4
Automation Systems Catalog, publication B111
17.0
Complying with European
Union Directives