Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW User Manual
Page 105
Data Table Addressing and Editing
4-37
1.
Insert, append, or replace an instruction in a ladder program.
2.
When prompted for an address, type in a new symbol name.
3.
The software displays the Auto Addressing screen with a list of the currently
defined data files. Highlight a file and press
[F9]
Selpos
.
4.
The software shows you the data table for the file you selected. The display is
automatically formatted in words or bits, depending on the type of instruction you
are programming. (If you selected the Input or Output file, the I/O Configuration
screen is displayed. Highlight the slot you wish to use then press
[F2]
Manual
.)
5.
Move the cursor to the word or bit you want to associate with the symbol. Press
[Enter]
.
6.
The software associates the word or bit with the symbol.