Rebuild damaged database – Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW User Manual
Page 323
MicroLogix 1000 and PLC-500 A.I. Series Software Reference
14-2
Rebuild Damaged Database
The Rebuild Damaged Database option corrects database files that have either been
damaged or were produced using a different version of PLC-500 A.I. Leaving the
online or offline ladder editor by rebooting the computer often damages the database,
making a rebuild necessary.
If the system fails to rebuild the database or if rebuilding the database does not correct
the problem, go to
Repair/Compact Database
, on page
14-14
.
To rebuild the database:
1.
If you want to rebuild the database for one project, select that project from
[F1]
Select Program/SLC-500 Addr
on the Main Menu.
2.
From the Main Menu, select
[F5]
Utility Options
.
3.
From the Utility Options menu, select
[F1]
Rebuild Damaged Data Base
.
4.
The following window appears. Select the appropriate option.
5.
The system asks you if you want to force a rebuild of the index files. Select
[F5]
No
unless a previous rebuild failed to correct a database problem.
6.
A status screen appears when the rebuild is in progress.
When completed, press any character key to return to the menu structure.