Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW - Manual (Page 365)

Configuration for Online Communications
15-29
DH+ Direct Local/Remote Settings
(SLC 5/04 OS401 processors only)
SLC 5/04 OS401 processors have remote communication capability. All DH+ direct
drivers, except for the serial drivers, have the parameter [F9] LOCAL to allow you to
configure remote settings. This section describes the options available from this
parameter.
Note SLC 5/04 OS400 processors do not support remote communications. If you select a
network mode other than LOCAL, the processor will not be able to communicate with
the PLC-500 A.I. software.
1. When you press [F9] LOCAL from the Configure Online Communications
Hardware screen, the following menu appears.
Leave the Network Mode set to LOCAL for communication on a local network.
Local Network Example:
SLC 5/04
DH+
Computer