Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW - Manual (Page 366)

MicroLogix 1000 and PLC-500 A.I. Series Software Reference
15-30
2. Press [F1] Network Mode and the following menu will appear.
Remote Network Example:
SLC 5/04
OS401
DH+
Computer
1785-KA
1785-KA
DH+
110
8
210
8
DH
Set the following parameters:
§ Press [F2] Local Address to enter the local KA module’s address in octal.
§
Press [F3] Remote Address to enter the remote KA module’s address in octal.
Note The leftmost digit (64’s digit) of the local and remote addresses must be different. For
example, addresses 110 and 220 are valid, but 110 and 120 are not.