Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW - Manual (Page 297)

Customizing PLC-500 A.I.
12-3
3. Use the arrow keys to highlight a topic and press [Enter] . The topic will be
displayed.
4. Use [PgUp] and [PgDn] to move through the topic.
5. Press [Esc] when you are done viewing the topic.
Adding Help Topics
Configuration of the help data base requires two or more ASCII files created in a
specific format. The first file is called HELP.DIR and acts as a directory for the other
help data base files. Each of the other help files may have any valid DOS file name, as
long as the file name has a .HLP extension. The HELP.DIR file and several .HLP files
are included when User Configurable Help is installed.
To add a help topic:
1. Add a line to the HELP.DIR file with the new topic.
§ Open HELP.DIR in a text editor or word processor. If you use a word
processor be sure to save the file as ASCII or DOS text.
§ Type a line with a title for the new help topic followed by a comma and a .HLP
filename. For example,
HOW TO CREATE USER DEFINED HELP SCREENS,help1.hlp