Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW - Manual (Page 522)

Error Codes
B-xxi
5: SLC_5
Invalid Data File Size-File:%d Size:%d ACH CORRUPTED
6: SLC_6
Program doesn’t start at the end of the data table! ACH CORRUPTED
7: SLC_7
Invalid # of Program Files (%d) ACH CORRUPTED
8: SLC_8
Invalid Rung Size File:%d Rung:%d Size:%d ACH CORRUPTED
9: SLC_9
Attempting to go ONLINE, but there is no SLC 500 Compiled program stored in ACH
FILE! Must UPLOAD before going ONLINE! - OR if downloading, there are errors in
the Ladder Logic, so the program hasn’t been compiled, and must be re-edited!
10: SLC_10
Online/Offline Programs don’t match! Must UPLOAD program before going
ONLINE!
11: SLC_11
Can’t allocate n bytes for Data Table Storage.
This is a memory allocation error. There is not enough free RAM available.
12: SLC_12
Can’t allocate %u bytes for Program Storage
This is a memory allocation error. There is not enough free RAM available.
13: SLC_13
Can’t allocate space to read data table pointers for online operation - or invalid # of
data table files in the Compiled Ladder Logic in the ACH file.
14: SLC_14
Can’t allocate space to read force table pointers for online operation - or invalid # of
force files in the Compiled Ladder Logic in the ACH file.
15: SLC_15
Invalid name stored in the SLC 500 - must download program to SLC 500.