Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW - Manual (Page 349)

Configuration for Online Communications
15-13
1784–KR Communication Board
The 1784–KR interface card is used on a DH-485 network and does not require you to
use a PC communication port. See the Allen-Bradley publication SLC 500 Modular
Hardware Style Installation and Operation Manual , Publication 1747–6.2 for
connection information.
The table below describes the parameters that become available when you select this
device on a DH-485 network.
Parameter Description
[F1] Computer/Terminal
Address
enter the station address (0-31 decimal). This
address must be unique on the network.
[F4] KR Memory Address enter the -KR card’s base memory address *
[F5] Baud rate select the baud rate of the DH-485 network
[F6] KR I/O Port Addr enter the -KR card’s I/O address
[F7] KR Interrupt # enter the -KR card’s interrupt number
*For information on excluding memory addresses to avoid conflicts with the interface
card, refer to the Hardware Interface Configuration Guide .