Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW - Manual (Page 361)

Configuration for Online Communications
15-25
RSI LAN Logistics NETBIOS
The table below describes the parameters that become available when you select this
device.
Communication Medium
Parameter DH+ / DH-485 Bridged DH+
[F5] Server
Name
enter the DH+ server name. (You
can also select the name from a
list. Press
[Ctrl-F2] Network
Diagnostics . Select [F3] List
active Network Servers .
Highlight the server name you
want and press
[Enter] .)
enter the DH+ server name. (You
can also select the name from a
list. Press
[Ctrl-F2] Network
Diagnostics . Select [F3] List
active Network Servers .
Highlight the server name you
want and press
[Enter] .)
[F7] 1785-KA5
DH+ Address
enter the DH+ station address of
the 1785-KA5 module not available
[F8] Terminal
Name
enter an 8-character name that
will be displayed when a DH+
Who Active is run enter an 8-character name that
will be displayed when a DH+
Who Active is run
[F9] DH+ Link
ID
enter the DH+ channel link ID of
the 1785-KA5 not available
[F9] LOCAL not available displays the Configure Local
Remote Settings menu. From
this menu, press
[F1] Network
Mode to toggle between LOCAL,
REMOTE, or DH+ ROUTING.
Refer to
DH+ Direct
Local/Remote Settings on page
15-29 .