Enabling user logging – Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW User Manual
Page 489
Security System
20-5
Enabling User Logging
User logging keeps track of each user who logs in, which function they used (Online,
Offline, or Upload and Download), the project name, the station number, and the time
and duration of their access. The log also tracks invalid attempts to access the
software, such as using the incorrect password to access a function that the user has
rights to. The log does not record attempts to access a function that the user does not
have rights to. The system date and time and user name are written to an encrypted file
called SLC5LL.LOG when these functions are initiated and exited.
Note
You must have users set up in the software before PLC-500 A.I. can log users’ sessions.
See
User Setup Options
below.
To enable the logging of user actions:
1.
From the System Setup menu, select
[F2]
Enable/Disable User Disk Logging
.
The upper right corner of the title window shows that logging is enabled.
2.
Press
[Esc]
to exit and save changes.