Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW - Manual (Page 476)

Troubleshooting and Diagnostics
19-45
5. Type a description for the screen, and press [Enter] to create the custom display
screen and enter edit mode.
The screen is divided into 40 cells (4 columns and ten rows).
6. Move the cursor to a cell where you want an address.
7. Press [F1] Edit. The field opens for editing.
8. Type the address or symbol name you want to display in the cell, and press
[Enter] .
9. You can also perform the following functions while in edit mode:
[F1] Edit edit the address of the highlighted cell
[F2] Clear delete the address of the highlighted cell
[F3] Mode change the display radix of the highlighted address (some
restrictions apply for certain file types)
[F4] commenT type a comment to appear in the highlighted cell. Two
comment lines are allowed. These comments are only used on
the Custom Display screen.
[F7] eXport export the current Custom Display to the old .SCR format for
use with versions prior to 8.02
α
. Refer to the help screens
( [F10] Help ) for more information on the .SCR and .CDL
formats.