Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW - Manual (Page 271)

Creating and Printing Reports
11-35
Rack Description Report
The Rack Description Report prints information about the I/O cards in the rack(s) and
the addresses. Three modes are available for this report, Overview , Full List , and
Oview+Full .
Overview mode shows the slots on the rack and the I/O card assigned to each slot. A
sample report is shown below.
Full List mode shows all addresses on each I/O card along with the symbol and
description text for that point. The report also prints a summary to the right of the
blocks of data, including a summary of the I/O cards for that rack. A sample report is
shown on the following page.