Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW - Manual (Page 523)

MicroLogix 1000 and PLC-500 A.I. Series Software Reference
B-xxii
17: SLC_17
Too many words in Address List File - Some elements towards the end of the rung
display won’t be updated.
18: SLC_18
PROCESSOR TYPE ERROR - Offline Memory Image has been compiled for a %s
processor, but the target SLC 500 is a %s family processor - PROGRAM MUST BE
COMPILED FOR THE CORRECT PROCESSOR FAMILY!
19: SLC_19
Can’t read %s force memory DHWYERROR=%Xh EXTSTATUS=%Xh
20: SLC_20
Can’t expand data table to accommodate operation - max buffer size=%u bytes!
21: SLC_21
Can’t expand program buffer to accommodate operation - max buffer size=%u bytes
30: SLC_30
DECOMPILER-Unknown start of rung codes-%02X %02X %02X
31: SLC_31
DECOMPILER-Call to unknown instruction routine - Call Address %04X
32: SLC_32
DECOMPILER-Couldn’t find instruction jump to address - addr %04X
33: SLC_33
DECOMPILER-Data Table address not found in data table area - addr %04X
34: SLC_34
DECOMPILER-Couldn’t find I/O word - type %02X addr %04X
35: SLC_35
DECOMPILER-Unknown data table type encountered - type %02X
36: SLC_36
DECOMPILER-JSR to unknown program file - addr %04X
37: SLC_37
ERROR! SLC 500 doesn’t have any I/O Slots Defined! Must define a rack before
continuing!