Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW - Manual (Page 340)

MicroLogix 1000 and PLC-500 A.I. Series Software Reference
15-4
PLC-500 A.I.
Programming Terminal
equipped with a
Communication Interface
Module (See the table on
page 15-9 for a list of
communication devices.)
SLC 5/03
Processor
Address 3
(Node 3)
SLC 5/02
Processor
Address 2
(Node 2)
24 VDC
Power
Supply
SLC 5/01
Processor
Address 1
(Node 1)
1785-KA5
DH+ to DH-485
Gateway
Module
SLC 5/04
Processor
PLC-5
Processor
1.
Terminal on DH-485
Network
2.
DH-485 Network
4.
DH+ Network
3.
Terminal on DH+
Network
To receptacle
A, B, C, or D
A B C D
1747-AIC
1747-NP1
Node 4 on
DH-485
Nodes on
DH+
5130-KA
5130-RM
5820-EI
PI chassis
PLC-500 A.I. Programming
Terminal equipped with TCP/IP
Software
Ethernet card
6.
Terminal on
Ethernet
5. Ethernet
1770-
KF3
1747-KE
1770-
KF2
1785-KE
PLC-500 A.I.
Programming
Terminal
DF1
(RS-232)
DF1
(RS-232)
PLC-500 A.I.
Programming Terminal
equipped with a
Communication Interface
Module (See the table on
page 15-9 for a list of
communication devices.)
7.
Terminal on DF1
modem
modem