Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW - Manual (Page 399)

17
Uploading and Downloading
Ladder Programs
Upload/Download options are used to load ladder programs to and from SLC 500
processors. This chapter discusses:
•
Downloading a ladder program to a SLC 500 from your computer
•
Uploading a ladder program from a SLC 500 to your computer
•
Transferring processor files to and from an EEPROM.
•
Uploading or transferring a processor file from the UVPROM.
•
Converting .ACH files to hexadecimal format.
Before using the upload/download features, make sure that your communication
hardware is configured properly.
Note If communications cannot be established during the upload/download functions, the
Who Active menu will appear. If no processors are displayed at any of the station
numbers, your communication hardware may not be properly configured. If any error
messages appear when you attempt to communicate with a SLC 500, make sure your
Online Communications Hardware settings in PLC-500 A.I. are correct.