Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW - Manual (Page 57)

3
Configuring the SLC 500 CPU and
I/O Modules
When you program your SLC 500 system, you need to configure the following:
•
CPU (processor) type
•
Rack
•
I/O Modules
•
Processor Status Bits
The general procedure is:
1. Start the PLC-500 A.I. software.
2. Define a project. See Chapter 2 - Handling Project Files for details.
3. Use the Offline Editor to configure the CPU and I/O. See the following pages for
details.
4. Set the appropriate processor status information. See the following pages for
details.
You will then be ready to program your ladder logic.