Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW - Manual (Page 137)

MicroLogix 1000 and PLC-500 A.I. Series Software Reference
6-18
Example 2
A branch is inserted as shown on the screen below.
If you press the left arrow key, [ Я Я ] , the start of the branch will move to the left. The
branch in this example will then appear as follows.
If you press [
Я Я
] again, the start of the branch will move further to the left as shown
below. (If you press [ а а ] the start of the branch will move back to the right.)