Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW - Manual (Page 487)

Security System
20-3
Security System Setup Options
To set up the PLC-500 A.I. software system security:
1. From the Main Menu, select [F9] Configure Program Parameters .
2. Select [F5] Modify System Security Parameters .
3. The system prompts you for a new master password (or the existing password if
one has already been defined). The password may be up to 15 characters long.
Type the password and press [Enter] .
4. The system displays a menu with two options: [F1] System Setup and [F2] User
Setup .
5. Select [F1] System Setup .
6. Set up options as described in the following sections.
Note Enabling and disabling the system security applies only to the PLC-500 A.I. security
system, not the SLC 500 and MicroLogix processor passwords.