Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW - Manual (Page 237)

11
Creating and Printing Reports
Using the Program Reporting feature, you can produce printouts of:
•
The ladder program
•
The cross reference data base
•
Data table information
•
The documentation data base
If you fully documented your program, you can also produce reports showing the I/O
module and rack configuration information and an I/O parts list.
The printer configuration option provides a template for entering information regarding
paper size, printer control codes and other printer specific options. You can use
virtually any dot-matrix or PCL-compatible (HP LaserJet) printer with the Program
Reporting feature.
The report configuration option determines which reports the system will print, and
options for configuring the ladder report, the data table report and cross reference
reports. You may save the report configuration to a disk file for easy recall later, or to
use with the Batch Reporting Options.
Note Report configurations created with earlier versions of PLC-500 A.I. may not be
compatible with current versions. You must create and save new printer configuration
files to use with more recent revisions of the software.
This chapter provides example report configurations, including compressed and normal
cross reference options on the ladder and cross reference reports. The possible
combinations of parameters are too numerous to list.