Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW - Manual (Page 176)

MicroLogix 1000 and PLC-500 A.I. Series Software Reference
8-6
4. Follow the instructions given in Entering an Address Description While Defining
an Instruction , above.
To change an address description from the Display Address function:
1. Press [Shift - F2] to display the Data Table Files screen.
2. Highlight the file containing the address you want to describe.
3. Press [F1] Monitor to display the contents of the file.
Or (instead of steps 1-3), from the top menu bar press [F8] Display , then [F1]
Addr and enter the address.
4. Highlight the address you want to describe, and press [F6] Des . The Instruction
Description Editor window opens, allowing you to edit the description for the
address.
5. Follow the instructions given in Entering an Address Description While Defining
an Instruction , above.
You can also change instruction addresses through the database editor. See Chapter 9 -
Using the Database Editor for details.
Search for Undescribed Instructions
When you are in the offline editor, you can search for instructions that have not yet
been documented. This feature is designed to help you complete the documentation for
a partially documented program. When the Search for Undescribed Instructions
function finds an undocumented address used in an instruction, it displays the
instruction and opens the Instruction Description Editor (described above) for you to
add the description.
To search for undescribed instructions:
1. From the top menu bar, press [F4] Tags .
2. Press [F6] srUndes . The system looks through the ladder program, searching for
instructions without a description. When it locates one, it displays the rung
containing the instruction, and opens the Instruction Description Editor.
Command Portal keys
for this function:
.UM
Command Portal keys
for this function:
.TU