Rockwell Automation 9323-S5500D A.I. SERIES MICROLOGIX 1000 AND PLC-500 SOFTW - Manual (Page 490)

MicroLogix 1000 and PLC-500 A.I. Series Software Reference
20-6
Printing the User Log
Use this option to send the user log file to a print device or ASCII file on disk. Enter
any valid DOS device or filename at the prompt.
To print the log of user actions:
1. From the System Setup menu, select [F3] Print User Log . A prompt will appear
for the device or file name to print the data to. The default is LPT1.
2. If you want to print the information to a printer attached to LPT1, simply press
[Enter] . Otherwise, type the device or file name and press [Enter] .
3. Press [Esc] to exit.
Clearing the User Log
This option erases the contents of SLC5LL.LOG.
To delete the log of user actions:
1. From the System Setup menu, select [F4] Clear User Log . The system will
prompt you to confirm that it is OK to delete the user log.
2. Select [F1] Yes to clear the log.
3. Press [Esc] to exit.
Specifying the User Log Path
Use this option to select the DOS directory where the SLC5LL.LOG file will be located.
To select a DOS directory for the log of user actions:
1. From the System Setup menu, select [F5] Specify User Log Path . A prompt
appears for you to enter the path where the SLC5LL.LOG file will be stored.
2. Type a path name and press [Enter] . The directory will be created for you if it
doesn’t already exist.
3. Press [Esc] to exit.