Yaskawa MotionSuite Series Machine Controller Software Manual User Manual
Page 102
Advertising
MotionSuite™ Series Machine Controller Software Manual
Chapter 4: File Manager
4-45
4.6 CPU Log-on/Log-off
The PLC or CPU must be logged on when you create a PLC or a CPU program or
definition data.
4.6.1
Logging on to the CPU
The MP9xx should be logged on to the PLC folder and other PLCs should be logged
on to the CPU folder.
a. Double-click the PLC or CPU folder to be logged on (here, a PLC folder is
selected).
b. Input the user name and password, then choose the OK button.
c. The “+” symbol appears at the left side of the folder when the log-on is com-
plete.
From this point, the user can edit the program or definition data in the logged on
PLC or CPU folder.
Note:
It is not necessary to input a user name and password when setting a default user.
Advertising