Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 123)

MotionSuite™ Series Machine Controller Software Manual Chapter 4: File Manager
4-66
b. All Transfer is started when choosing the OK button. When choosing the Cancel
button the next All Transfer window is opened.
1. Source
If program or definition data is to be transferred from HD (hard disk), or FD
(floppy disk), the original directory name is displayed.
If program or definition data is to be transferred from the PLC, original PLC
connection information and PLC model are displayed.
2. Destination
If program or definition data is transferred to HD or FD, the destination directory
name is displayed.
If program or definition data is transferred to the PLC, the destination PLC con-
nection information and PLC model are displayed.
3. Transfer Mode
Transfer mode can be selected.
Addition Mode: Transfer file to the directory which has the same name as
the original file name.
New Mode: Delete the directory which has the same name as the
original file name, as well as its contents. Then make a new
directory and transfer the file to the new directory.
If the transfer object is in the PLC, only the Addition Mode is possible.
3
2
1
4