Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 128)

MotionSuite™ Series Machine Controller Software Manual Chapter 4: File Manager
4-71
Note:
The transfer object directory can also be changed by selecting the Change button
shown in the following window.
3. Changing Transfer Object Drive (other media)
When File Transfer Source or Destination is in another media such as magneto-optical
disk (MO), the drive number and path name can be changed.
a. Select the Change Source (O) or Change Destination (R) from View (V) in the
File Transfer menu.
b. Set up a new drive number and path name in the dialog box, then choose the OK
button.
Note:
The transfer object directory can also be changed by selecting the Change button
shown in the following window.
Changing PLC Status
PLC or CPU status can be switched.
a. Select PLC Running Status (P) from View (V) in the File Transfer menu.