Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 208)

MotionSuite™ Series Machine Controller Software Manual Chapter 7: System Data Definition
7-35
1. Range
Input the M register range (0 ~ 32767) to be used as a common memory. Input a
non-duplicated M register range. Be sure that the Start Number
≤ End Number.
2. Scan
Input the scan at which to input/output the M register between the CPUs.
HI: High-speed scan input
HO: High-speed scan output
LI: Low-speed scan input
LO: Low-speed scan output
3. I/O Name
Input the name of the M register range in 32 16-bit characters (16 32-bit charac-
ters) or less.
Note:
A maximum of 64 rows may be allocated to the common memory.
Deletion of Common Memory Assignment Data
Common memory assignment data is deleted in row units. Delete data as follows:
a. Move the cursor to the data to be deleted.
b. Select Delete Paste (D) from Edit (E) in the System Configuration menu.
1
2
3