Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 134)

MotionSuite™ Series Machine Controller Software Manual Chapter 4: File Manager
4-77
1. Transfer Source
If program or definition data is to be transferred from HD (hard disk) or FD
(floppy disk), the original directory name is displayed.
If program or definition data is to be transferred from the PLC, the original PLC
connection information and PLC name are displayed.
2. Transfer Destination
If program or definition data is transferred to HD or FD, the destination directory
name is displayed.
If program or definition data is transferred to the PLC, the destination PLC con-
nection information and PLC name are displayed.
3. Transfer Mode
Transfer mode can be selected.
Addition Mode: Transfer file to the directory which has the same name as
the original file directory name.
New Mode: Delete the directory which has the same name as the
original directory name, as well as its contents. Then make a
new directory and transfer the file to the new directory.
If the transfer object is in the PLC, only the Addition Mode is possible.
4. Transfer Object
File transfer object can be selected.
The transfer object settings can be cleared by selecting the Clear (W) from the
File (F) in the File Transfer menu.
File Transfer Window Menu
Menus displayed in the Individual Transfer Window are shown in Table 4.28.
Table 4.28: File Transfer Window Menu
Menu Function Reference
File (F)
Execute (S) Starts Individual File Transfer —
Clear (W) Clears transfer object settings —
Exit (E) Closes File Transfer window —
View (V)
Tool Bar (T) Displays tool bar —
Status Bar (S) Displays status bar —
Error List (I) Displays error window again —
Change Source (O) Changes file transfer source —
Change Destination (R) Changes file transfer destination —
Help (H)
About App. (A) Displays version information —