Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 330)

MotionSuite™ Series Machine Controller Software Manual Chapter 8: Ladder Programming
8-82
Note:
When saving the Tuning Panel, a check is performed as to whether the definition data
was input correctly. An error window is displayed if an error is detected. See Item
8.2.10 “Ladder Program Storage” regarding this error window.
8.4.6 Printing from the Tuning Panel
It is possible to print from the Tuning Panel window without opening the Print Man-
ager. However, only the Tuning Panel currently open can be printed. For page setup
and print execution method, see Item 8.2.11 “Ladder Program Printing.”
8.4.7 Ending Tuning Panel Creation
Tuning Panel creation ends when the Tuning Panel window is closed. To close the
Tuning Panel window, select Close (C) from the File (F) menu.