Yaskawa MotionSuite Series Machine Controller Software Manual User Manual
Page 21
Advertising
MotionSuite™ Series Machine Controller Software Manual
Chapter 2: Installation
2-2
2.1 Installation Procedures
This section explains how to install the MotionWorks™ software.
2.1.1
Preparing the Installation Disk
Starting the CD-ROM
Double-click the “set-up.exe” to start the installation.
2.1.2
Set-up Preparation
The preparation screen of the set-up is shown as follows. Wait during the installation
preparation until the next screen is displayed.
Advertising