Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 321)

MotionSuite™ Series Machine Controller Software Manual Chapter 8: Ladder Programming
8-73
Display Selection
Parts assembling drawing display formats are of the following two types: register
number only display (normal display), and register number and user function symbol
display (symbol + setting display). Normal display and symbol + setting display can
be switched in the following manner.
a. Select Display Selection (D) from View (V) in the tabular format program
menu.
b. The display format is switched and the parts assembling table displayed.
Note:
The display format cannot be switched if the parts unit is designated as singular.
8.3.8 Table Editing
This function edits tables in units of rows, columns, and blocks.
Cursor Movement
Although the cursor is normally moved by pressing the arrow keys, or clicking cells
with the mouse, it is also possible to move the cursor to first column, last column, or
next page as needed.
a. Display Head Row
This moves the cursor to the first row of a table.
a.1 Select Display Head Row (F) from View (V) in the tabular format pro-
gram menu.
a.2 The cursor is displayed at the first row of the table.
b. Display Last Row
This moves the cursor to the last row of a table.
b.1 Select Display Last Row (E) from View (V) in the tabular format program
menu.
b.2 The cursor is displayed at the last row of the table.