7 switching on-line/off-line mode – Yaskawa MotionSuite Series Machine Controller Software Manual User Manual
Page 105
Advertising
MotionSuite™ Series Machine Controller Software Manual
Chapter 4: File Manager
4-48
4.7 Switching On-line/Off-line Mode
When on-line mode is designated, program or definition data is linked to the PLC. When
off-line mode is designated, program or definition data is linked to the hard disk.
a. Click the PLC or the CPU folder in which the on-line/off-line mode is to be
switched (here, a PLC folder is selected).
b. Select Property (R) from File (F)
in the File Manager menu.
Or, select it from the pop-up menu.
Advertising