Yaskawa MotionSuite Series Machine Controller Software Manual User Manual
Page 127
Advertising
MotionSuite™ Series Machine Controller Software Manual
Chapter 4: File Manager
4-70
button.
Note:
1. The transfer object directory also can be changed by selecting the Change button
shown in the following window.
2. The PLC name and the directory name in the floppy disk must be input with 8
characters or less.
3. Changing Transfer Object Directory (HD)
When the File Transfer Source or Destination is on the hard disk (HD), the PLC con-
figuration on the hard disk can be changed.
a. Select Change Source (O) or Change Destination (R) from View (V) in the
File Transfer menu.
b. Select the PLC configuration to be changed in the dialog box, then choose the
OK button.
.
Advertising