Yaskawa MotionSuite Series Machine Controller Software Manual User Manual
Page 32
Advertising
MotionSuite™ Series Machine Controller Software Manual
Chapter 2: Installation
2-13
2.2.2
Setting Communication Port
The main screen of the communication process is shown as follows. As the RS-232C
setting is the standard setting, the logical port1 is the serial.
Either double-click the logical port number, or, select a logical port, then select Set-
ting (E) from the File (F) menu.
The logical port setting screen is displayed. Select the port kind (type), then click the
Detail button.
Advertising