Yaskawa MotionSuite Series Machine Controller Software Manual User Manual
Page 200
Advertising
MotionSuite™ Series Machine Controller Software Manual
Chapter 7: System Data Definition
7-27
1. Group Name
Select the group name set in the group definition.
2. Logical Axis Name
Select the logical axis name. The parameter monitor is displayed in axis units.
3. Parameter Name
The parameter name is displayed.
4. Register Number
Displays the register number corresponding to the parameter name. This register
number has a fixed allocation according to the servo number.
5. Current Value
The current value of a parameter is displayed in the on-line mode. Nothing is
displayed in the off-line mode.
6. Unit
Displays the parameter units.
1
2
3
4
5
6
Advertising