Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 430)

MotionSuite™ Series Machine Controller Software Manual Chapter 12: Printing
12-10
12.3 Selecting Register Print Data
This function selects S, I, O, M, D, and # register print data.
12.3.1 Register Print Settings
The following screen is displayed upon clicking the Register tab in the print window.
Select register-related print items in this window.
The register print settings are the same as those for programs. See Item 12.2.1 “Pro-
gram Print Set-up.”
12.3.2 Detailed Register Settings
It is necessary to set detailed printing items for any print item with a Details button
displayed on the right side. In general, detailed items are set as follows:
a. Select the Details button.
b. Set the print items in the detailed item dialogue box.
c. Select the OK button.
Detailed S Register Setting
The S register details dialogue box is displayed upon selecting the Details button. In
this box, it is possible to select all register ranges at once, and to sort the registers.