Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 420)

MotionSuite™ Series Machine Controller Software Manual Chapter 11: Debug Operation
11-22
Execution from Comment and Label Row
The step can be executed from either the row with ; only, or the comment row. However,
at this point, execute the possible command appearing after it.
SNG Motion
The SNG designation does not function during the debug operation.
Set up a cursor to the comment row.
Ο
When the step is executed, the
possible command is executed after
the sixth row. At this point, the fmx
command is executed.
Ο
The 30th and 31st rows are
designated by SNG, but they
are in the step execution.