Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 107)

MotionSuite™ Series Machine Controller Software Manual Chapter 4: File Manager
4-50
4.8 Switching CPU Status
Follow the procedures below to switch the PLC or CPU to Run or Stop.
a. Click the PLC or the CPU folder in which the CPU status is to be switched (here,
a PLC folder is selected).
b. Select CPU Control (C) from Edit (E) in the File Manager menu.
Or, select it from the pop-up menu.
c. Choose the Run button when you want to switch the CPU to operation status.
Otherwise, choose the Stop button.
The CPU status has been switched.