Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 33)

MotionSuite™ Series Machine Controller Software Manual Chapter 2: Installation
2-14
When the Detail button is selected, the following screen is displayed. Set up the
parameters of the serial port, then choose the OK button.
The logical port setting screen returns. Choose the OK button to return to the main
screen of the communication process. At this point, since the parameter setting is
complete, the setting contents must be saved in the file.
2.2.3 Saving Communication Port Setting Values
Save the communication port setting values to the file.
The confirmation message window is displayed when selecting Save (S) from the File
(F) menu. Choose the Yes button to save the information.
2.2.4 Communication Process Completion
Select Exit (X) from the File (F) menu to close the communication process screen.