7 continuous transfer – Yaskawa MotionSuite Series Machine Controller Software Manual User Manual
Page 137
Advertising
MotionSuite™ Series Machine Controller Software Manual
Chapter 4: File Manager
4-80
4.13.7 Continuous Transfer
Programs or definition data in multiple PLCs can be transferred.
1. Transfer Mode
Transfer mode can be selected.
Addition Mode:
Transfer file to the directory which has the same name as
the original file directory name.
New Mode:
Delete the directory which has the same name as the
original file directory name, as well as its contents. Then
make a new directory and transfer the file to the new
directory.
If the transfer object is in the PLC, only the Addition Mode is possible.
2. Transfer Object
The file transfer object can be selected. Transfer contents include all files saved
in the selected PLC.
2
1
Advertising