Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 166)

MotionSuite™ Series Machine Controller Software Manual Chapter 6: Module Configuration
6-22
Configuration Information
The configuration information is indicated by items (1) ~ (3) displayed under the title bar.
1. Rack Number
The rack number defined by the network is displayed.
2. Circuit Number
The circuit number is displayed. The machine controller is fixed as “01”.
3. Register Range
The range of the input/output register number (which is input by Module Defini-
tion) is displayed.
Setting the Parameters
Set up the necessary parameters when using the network transfer system.
1 2 3
1
2
3
4