Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 376)

MotionSuite™ Series Machine Controller Software Manual Chapter 10: Monitor
10-2
10.1 Register List
The register list displays the current values of the S register, I register, O register, M
register, D register, and C register. The value of each register can be changed in the
register list.
10.1.1 Structure of the Register/Register List Window
This item explains the menus in the register and register list windows.
The register window is open when starting the register list. By executing the “Open
Register” command in the register window, the register values are displayed as a sub-
window. This sub-window, in which the register values are displayed, is called the
“Register List Window.”
Opening the Register List Window
The register list window can be opened from the File Manager and the Engineering
Manager.
a. From the File Manager
Select Tool (T) → Register List (R).
b. From the Engineering Manager Window
Select File (F) → Open (O) → Tool (T) → Register List (R).