3 set-up parameters – Yaskawa MotionSuite Series Machine Controller Software Manual User Manual
Page 191
Advertising
MotionSuite™ Series Machine Controller Software Manual
Chapter 7: System Data Definition
7-18
7.3.3
Set-up Parameters
The following screen is displayed upon clicking the Set-up Parameters tab in the
motion parameter window. The parameters necessary for machine system set-up are
set in this screen.
1. Group Name
Select the group name set in the group definition.
2. Logical Axis Name
Select the logical axis name.
3. Parameter Names
This shows the parameter names.
4. Register Number
Displays the register number corresponding to the parameter name.
1
2
8
3
4
5
6
7
Advertising