Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 136)

MotionSuite™ Series Machine Controller Software Manual Chapter 4: File Manager
4-79
c. Table Data
Select the Table Data to be transferred. The selection can be cleared by choosing
the CNCL-A button.
If Table Data Transfer is selected, both Attribution Definition and Table Data
are transferred. Otherwise, only Attribution Definition is transferred. As soon
as the SLCT-A button is chosen, all of the Table data is transferred.
d. Constant Table (C Register)
Select the C Register Table to be transferred. The selection can be cleared by
choosing the CNCL-A button. As soon as the SLCT-A button is chosen, all C
Register Tables are transferred.
e. Motion Main Program
Select the Motion Main Program to be transferred. The selection can be cleared
by choosing the CNCL-A button. As soon as the SLCT-A button is chosen, all
Motion Main programs are transferred.
f. Motion Sub-program
Select the Motion sub-program to be transferred. The selection can be cleared by
choosing the CNCL-A button. As soon as the SLCT-A button is chosen, all
Motion sub-programs are transferred.
4.13.6 Starting Transfer
To start the Individual Transfer refer to Item 4.13.2 “All Transfer Starting Transfer”
for starting methods.