Lenze 8400 - Manual (Page 1000)

16 Parameter reference
16.2 Parameter list | C01224
1000
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C01224
C01225
C01226
Parameter | Name:
C01224 | MCK: Ref. speeds
Data type: INTEGER_32
Index: 23351
d
= 5B37
h
Speeds for reference search/homing
 Homing
Setting range (min. value | unit | max. value)
0.0000 unit/s 214748.3647
Subcodes Lenze setting Info
C01224/1 720.0000 unit/s MCK: Ref. initial speed
• Starting speed for approaching the pre-stop signals.
C01224/2 180.0000 unit/s MCK: Ref. search speed
• Search speed for detecting the reference initiator.
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 10000
Parameter | Name:
C01225 | MCK: Ref. accelerations
Data type: INTEGER_32
Index: 23350
d
= 5B36
h
Accelerations for reference search/homing
 Homing
Setting range (min. value | unit | max. value)
0.0000 unit/s2 214748.3647
Subcodes Lenze setting Info
C01225/1 720.0000 unit/s2 MCK: Ref. initial acceleration
• Starting acceleration for the starting speed ramps.
C01225/2 720.0000 unit/s2 MCK: Ref. search acceleration
• Search acceleration for the search speed ramps.
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 10000
Parameter | Name:
C01226 | MCK: Ref. S-ramp time
Data type: UNSIGNED_16
Index: 23349
d
= 5B35
h
S-ramp time for reference search/homing
• Setting "0 s" ≡ no rounding
 Homing
Setting range (min. value | unit | max. value)
0.000 s 10.000
Subcodes Lenze setting Info
C01226/1 0.000 s MCK: Ref. S-ramp time
• S-ramp time for the starting and search speed ramps.
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1000