Lenze 8400 - Manual (Page 1124)

17 Working with the FB Editor
17.4 Reconfiguring the predefined interconnection
1124
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
17.4.1.1 Inserting a function block

How to insert a function block into the interconnection:
1. In the FB Editor toolbar, click the icon.
• The Insert Function Block dialog box appears:
2. Unless it is already displayed, select the Function Blocks tab.
• All function blocks available are displayed in the Search results list field.
• A preview of the selected function block is displayed.
• A detailed description of all available function blocks can be found in the main chapter
" Function library ". ( 1154)
3. If required, define Search criteria to narrow down the available function blocks:
• Block name:
String which must be contained in the name of the function block.
4. After changing the search criteria, press the Find button to update the selection.
• Then, only the function blocks complying with the features set in the search criteria are
shown in the Search Results list field.
• If no search criteria are set, all function blocks available are shown.
5. Select the function block to be inserted in the Search results list field.

Note!
In the FB Editor, function blocks are only available in the "Application interconnection"
level!