Lenze 8400 - Manual (Page 94)

3 Commissioning
3.10 PC manual control
94
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

How to execute a positioning:
1. Select the profile to be travelled (1 ... 15) in the Profile number list field.
2. If the controller is still inhibited, enable the controller via the Enable controller button.
• Please note that the controller is only enabled if no other sources of a controller inhibit
(e.g. terminal RFR) are active.
If the controller is in the "OperationEnabled" status:
3. Click the Run POS button to start the positioning process.
• Click the Stop POS button to stop an active positioning process anytime.